Puredry PD 12L Design, Руководство пользователя

Страница: 11 / 42

11
EN
HUMIDITY SET BUTTON
By pressing this button, the dehumidifier passes from continuous CONT mode to
smart mode. Press this button to set the desired humidity as follows from 40% to 80%
in 5% increments of:
40% → 45% → 50% → 55% → 60% → 65% → 70% → 75% → 80% → -- .
When the internal humidity is less than the adjusted humidity, the compressor will
stop automatically. The optimum humidity is between 50% - 60%. When the humidity
is set to "--%", the dehumidifier switches to CONT (constant drying / drying of clothes),
after 5 seconds the light "HUMSET" goes off and "CONT" indicator lights up.
After adjusting the desired humidity, the machine stops flashing in 5 seconds to show
the current ambient humidity.
Press and hold this key for 3 seconds, and the display shows the current ambient
temperature.
TIMER BUTTON
By pressing this button you can set between 1-24 hours of working time. When the
user sets the time of use, it will apear on the display. When the set is ''00'', it means
that the timer function has been canceled.
Press this button to adjust the fan speed. Each time you press the button the speed
changes between normal speed and high speed. At high speed the indicator light is
red, at low speed the indicator light is blue.
FAN SPEED
Dryer
Dryer mode : In this mode, the product works without stopping, despite the room's
humidity level. This is ideal for making sure that the clothes are perfectly dry.
• For drying clothes: place the dehumidiifer in a small room and set nearby the
clothes rack. Keep doors shut and allow the dehumidiifer to dry the clothes.
• For optimal results manual wringing of the clothes is suggested.
• Allow 30-50cm distance from the moist clothe..