SAFETY NOTES
02
03
PureAiro
WMDH 33
The WMDH 33 Dehumidifier must always be connected using a grounded electrical
connection as required for all electrical appliances. The warranty is voided and all
responsibility for the operation is born by the owner if non-grounded wiring is utilized.
The WMDH 33 Dehumidifier must only be installed, maintained and serviced by a qualified
technician.
Follow all state and local plumbing and electric codes.
The WMDH 33 Dehumidifier is intended only for operation when the unit is wall mounted
or in wall and level. Any other orientation could cause water to contact electrical
components.
If any water may have spread throughout the unit, the unit should be opened and allowed
to dry thoroughly before reconnecting to electric and restarting.
For proper operation, no obstruction should be located within 914mm of the discharge of
the unit
Do not insert any objects or fingers into the inlet or discharge. If service is required, call a
qualified technician. All work on unit should be done with the unit “off” and unplugged or
the breaker turned “off.”
Do not use water to clean the unit exterior. Only use a damp cloth to clean the exterior and
always unplug or disconnect the power of unit first.
The drain hose must be installed to ensure the proper flow of condensate water to a drain
source.
ELECTRICAL SUPPLY
POWER SUPPLY
OUTLET REQUIREMENT
CIRCUIT PROTECTOR
220 Volts AC may cause serious injury from electric shock.
WARNING
TO ENSURE SAFETY:
Disconnect electrical power before servicing.
Only plug unit into grounded electrical circuit.
Do not use extension cord.
Do not use a plug adapter.
220 V, 50 Hz AC, Single Phase
3-Prong
15 Amp Time Delay Fuse or Circuit Breaker
1
2
3
4
DEHUMIDIFIER DIAGRAM
FRONT VIEW
BACK VIEW
AIR DISCHARGE
FILTER MAINTENANCE
REMINDER
FRONT COVER SCREWS
AND CAPS
AIR INTAKE
FRONT COVER
WALL SCREW HOLES
REAR TOP COVER
Wall screw holes
Back cover
Power Cord
Routing Options
Drain Line
Routing Options
Chassis
