PureAiro ULTRA FAN 10S-S1, Руководство по установке и эксплуатации

Страница: 14 / 16

10
PROGRAMMING
WARNING ICON
The alarm icon will flash when
the controller wants to inform
you that a pending alarm is
about to be triggered.
Display lock alarm
The icon will be displayed if the screen is locked. If the icon is in the sleep
mode and it gets pressed it will make the screen to flicker. But when you
exit the lock mode, the icon disappears.
Humidity Alarm icon
It beeps or flashes when the low or the high alarm is triggered. To turn off
the sound, it will require that you press any key.
Temperature alarm icon
It flashes when the lowest or the highest temperature is triggered. To turn
the buzz or the sound off, it requires you to press any key.
2,1 Icon of host
The icon lights up when it is inserted. It corresponds to 2 interfaces.
Loop icon
It is a standby icon that will be displayed on the home page when enabled.
It is normally set up in the TEMP.