PureAire Monitoring Systems, Inc.
22
6.
Push the joystick in the center to enter the password. If you entered it correctly the display will scroll
Password OK.
NOTE: If an incorrect password has been entered, the display will indicate Password Failed. Push the joystick to the left
to access the monitoring mode. From this mode you can reenter the password again.
4.5 Changing the User Password
The Air Check
Ex
Methyl iodide monitor is supplied with a factory set password to prevent
unauthorized access to the menus. The user can change this password and the following explains
how to change the password.
1.
Push the joystick down to access the
Manage Passwords Menu
.
Manage Passwords
will scroll on the first line of
the digital display. The second line will still display the current ppm gas level.
2.
Push the joystick to the right to enter the input screen.
Enter New User Password
will scroll on the first line of the
digital display
3.
Push the joystick to the right to enter the input screen.
The letter A will appear and flash.
NOTE:
The display has characters that start with A through Z and 0 through 9.
Pushing the joystick up or down will permit you to scroll through the
alphanumeric characters.
...Password OK……
2
0
.
9
%
..Manage Passwords…
20
.9
%
…Enter New User Password…
0.0 PPM
A
2
0
.
9
%