Pure Water Mega Classic, Руководство оператора

Страница: 9 / 24

Mega-Classic Owners Manual page 9
c. Connect the 1/4” plastic tubing to the saddle tapping valve.
d. Coil a minimum of 8 feet of tubing behind the distiller to allow it to be moved
away from the wall for cleaning or service.
e. Cut the required length of tubing to run from the saddle tapping valve to the
distiller.
f. Install the speedfit elbow onto the fitting marked “Raw Water In”. Pull to test.
g. Connect the other end of the 1/4” plastic tubing to the elbow. Pull to test.
h. Turn the saddle tapping valve handle clockwise until you feel it is firmly
seated. Note : You have now pierced the water supply line and the valve is
closed.
i. Turn the handle counterclockwise to open the valve. Turn on the household
water supply and check the connections for leaks. Tighten where required.
3b. For installation on brass, steel, or PVC pipes :
Note : Make sure the water supply is turned off and drain the line. Make sure your
are using the COLD water line.
a. Drill a 3/16” hole in the pipe. Use a hand drill to avoid shock hazard.
b. Turn the saddle tapping valve handle to expose the lance beyond the rubber
gasket no more than 3/16”.
c. Assemble and place the body of the valve over the hole so the lance fits into
the hole. Make sure the outlet is in a convenient direction. See figure 1.
d. Tighten the screws evenly. The brackets should be parallel. Tighten firmly, but
do not overtighten.
e. Turn the saddle tapping vale handle clockwise to close the valve.
f. Connect the 1/4” plastic tubing to the saddle tapping valve.
g. Coil a minimum of 8 feet of tubing behind the distiller to allow it to be moved
away from the wall for cleaning or service.
h. Cut the required length of tubing to run from the saddle tapping valve to the
distiller.
i Install the speedfit elbow onto the fitting marked “Raw Water In”. Pull to test.
j. Connect the other end of the 1/4” plastic tubing to the elbow. Pull to test.
k. Turn the handle counterclockwise to open the valve. Turn on the household
water supply and check the connections for leaks. Tighten where required.
Caution: Never use the
hot water line for your
incoming water.