Pure Reliability PANDA II PR-2100B, Руководство по эксплуатации продукта

Страница: 8 / 12

8/12
panda II manual.doc
TABLE OF DIP SWITCHES SETTING
Each projector must be given a DMX start address so that the correct projector responds to the correct
control signals.The following table lists the setting codes of the address of the DIP switches, and the
luminaires are from No.1 to No.256. Each luminaire has 10 DIP switches with the numbers of #1, #2,
#3, #4, #5, #6, #7, #8, #9 and #10.
(For the PANDA II PR-2100B, set all #10 switches on the
“OFF”)
In the table, “0” means the switch is on the “OFF”, and “1” on the “ON”.
For example, if you want to look up the address setting of the No 50 luminaire, you will find the NO.
50 luminaire row (#1, #2, #3, #4, #5) with the codes of “1”, “0”, “1”, “0” , “0” and column (#6, #7, #8, #9)
with the codes of “0”, “1”, “1” , “0”. So set the #1, #3, #7 and #8 switches on the “ON”, and set the #2,
#4, #5, #6, #9, and #10 switches on the “OFF”.
Table of DIP #9
0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1
Switches Setting #8
0 0 0 0 1 1 1 1 0 0 0 0 1 1 1 1
0=OFF #7
0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1
1=ON #6
0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1
#1 #2 #3 #4 #5
0 0 0 0 0
1 0 0 0 0 1 9 17 25 33 41 49 57 65 73 81 89 97 105 113 121
0 1 0 0 0
1 1 0 0 0
0 0 1 0 0
1 0 1 0 0 2 10 18 26 34 42 50 58 66 74 82 90 98 106 114 122
0 1 1 0 0
1 1 1 0 0
0 0 0 1 0
1 0 0 1 0 3 11 19 27 35 43 51 59 67 75 83 91 99 107 115 123
0 1 0 1 0
1 1 0 1 0
0 0 1 1 0
1 0 1 1 0 4 12 20 28 36 44 52 60 68 76 84 92 100 108 116 124
0 1 1 1 0
1 1 1 1 0
0 0 0 0 1
1 0 0 0 1 5 13 21 29 37 45 53 61 69 77 85 93 101 109 117 125
0 1 0 0 1
1 1 0 0 1
0 0 1 0 1
1 0 1 0 1 6 14 22 30 38 46 54 62 70 78 86 94 102 110 118 126
0 1 1 0 1
1 1 1 0 1
0 0 0 1 1
1 0 0 1 1 7 15 23 31 39 47 55 63 71 79 87 95 103 111 119 127
0 1 0 1 1
1 1 0 1 1
0 0 1 1 1
1 0 1 1 1 8 16 24 32 40 48 56 64 72 80 88 96 104 112 120 128
0 1 1 1 1
1 1 1 1 1