Pure Pressure Bruteless, Руководство пользователя

Страница: 15 / 33

3.1 Base System Assembly
Bruteless Base System Assembly Instructions
●
Set up the platform and allow for 29” minimum platform height (from the floor to the
platform standing area). This is required for the downspout to clear the lower
filtration vessel. The false bottom goes into the upper vessel.
● The drain port needs to be oriented to drain into the lower filtration vessel.
●
Place second vessel on triangular dolly and position directly under drain and skim
ports. The lower filtration vessel shall contain the micron filtration bags.
● Attach a ball valves and 90 degree elbows to the skim and drain ports to use both for
draining.
○
There are options & alternatives for the skimport, sight glass, and temperature
gauge. You can also utilize the skim port for a site glass or filling.
○ Do not use the temperature gauge in the upper skim port, it can damage the
temperature gage prope.
●
The rear port is typically used for filling the vessel with a hose & ball valve assembly
from your pump.
○ Alternatively it can also be an additional port for a sight glass or temperature
gauge. If you choose to use both the temperature gauge and the sight glass
top filling the vessel will be required.
● Be sure all additional unused ports are capped and ball valves closed before filling.
**REMEMBER TO CLEAN YOUR EQUIPMENT BEFORE USE*
14
Note: Gaskets must be used at every port
connection in order to form a seal between
the ports. The sanitary clamp holds the port
assembly together, hand tighten only.