Pure Power Tools PUREANGGRINDER18, Оригинальное руководство пользователя

Страница: 9 / 12

9
2. AUXILIARY SIDE HANDLE
The Auxiliary Side Handle can be fitted
at either side of the machine. The Handle
simply screws into one or other of the
threaded holes on either side of the
machines head.
Attach the Auxiliary Side Handle to the side
of the machine most convenient for operator
comfort etc., and ensure that it is fully
tightened into the machine. The Auxiliary
Handle provides enhanced operator comfort
and control, and is therefore an important
safety feature
of this Angle Grinder.
3. DISC GUARD
WARNING: Never use the Angle Grinder
without the Disc Guard attached.
The position of the Disc Guard should
be adjusted so that it provides maximum
protection to the operator according to the
task at hand.
To reposition the Disc Guard:
• Open the Disc Guard Clamping Lever.
• Turn the Disc Guard to the required
operational position.
• Close the Disc Guard Clamping Lever.
• Check the security of the Disc Guard. It
must be clamped tightly to the machine.
Note: The clamping pressure of the Disc
Guard can be adjusted by turning the small
clamping pressure adjustment nut in the
required direction.
4. INSTALLING/REMOVING A DISC
WARNING: Only use Discs that are
specifically designed for use in this machine.
Note: When installing a Disc, ensure that the
Disc Guard is in place.
• Engage the arbor lock by pressing the
Arbor Lock Button.
Note: You may need to rotate the arbor
slightly by hand to fully engage the
arbor lock.
• Use the supplied ‘C’ spanner to unscrew
and remove the Outer Disc Flange.
• Ensure that the Inner Disc Flange is
correctly located on the machine arbor.
The two (2) segment shaped lugs must
engage with the two flats machined on the
arbor.
• Place the Disc over the arbor and seat it
correctly on the Inner Disc Flange.
• Replace the Outer Disc Flange.
18V Li-Ion
Angle Grinder
ADJUSTMENT
NUT