Pure Power Tools PUREANGGRINDER18, Оригинальное руководство пользователя

Страница: 8 / 12

SPECIFICATION
PURE 115 mm ANGLE GRINDER
Voltage: 18V-DC
No Load Speed:
7000 Min
-1
Disc ø115
Items Supplied
Instruction Manual 1pc
Auxiliary Side Handle 1pc
‘C’ Spanner (Disc Change) 1pc
Disc Guard 1pc
Grinding Disc 1pc
OPERATING INSTRUCTIONS
WARNING: Before using this tool, read the
Instruction Manual carefully.
Note: Some minor assembly is required
to prepare this machine for use. Do not
attach the Battery until assembly has been
completed and a safety check carried out.
BEFORE USE
A Battery Pack must be inserted into the
tool as detailed below. It is important that
the Battery Pack is of the designated type
recommended for this machine.
Newly purchased Battery Packs do not
come fully charged. Please refer to the PURE
CHARGER MANUAL for full details on how to
charge the Battery Pack for this machine.
1. INSTALLING OR REMOVING THE
BATTERY PACK
Check that the Battery Pack is of the
designated type for this machine. We
recommend that the Trigger Switch is locked
in the OFF position when removing or
inserting the Battery Pack. Refer to section
5 below.
a. Slide the Battery Pack into the base of the
tools handle. The Battery can only fit one way
round.
b. Gently push the Battery Pack fully into the
tools handle to engage the locking tabs. The
electrical connections inside the handle will
be made automatically.
c. To remove the Battery Pack, simply press
the two locking tabs with your finger and
thumb and withdraw the Battery Pack from
the handle.
8