Pure power tolls 10.8V Li-ION, Оригинальное руководство пользователя

Страница: 7 / 12

7
10.8V Li-Ion
Compact Drill / Driver
WARNING
This machine is not intended for use by
persons (including children) with reduced
physical, sensory or mental capabilities,
or lack of experience and knowledge,
unless they have been given supervision
or instruction concerning the safe use of
the machine by a person responsible for
their safety.
Children should be supervised to ensure
that they do not have access to, and are
not allowed to play with, this machine.
SAFETY LABELS & SYMBOLS
WARNING!
Do not operate machine if warning and
/ or instruction labels are missing or
damaged. Contact Evolution Power Tools
for replacement labels.
SPECIFICATION
PURE BATTERY DRILL/DRIVER
Voltage: 10.8V-DC
No Load Speed: 0-500 min-1
Max. Torque: 10Nm
Torque settings; 24 positions
Chuck Capacity: 10 mm
Noise and Vibration Data
Sound Pressure: L
PA
62.2dB(A) K=3dB
Sound Power: L
WrraA
73.2dB(A) K=3dB
Vibration: 1.394 m/s 2 K = 1.5 m/s 2
The declared vibration total value has
been measured in accordance with a
standard test method and may be used for
comparing one tool with another.
The declared vibration total value may also
be used in a preliminary assessment of
exposure.
WARNING
: The vibration emission during
actual use of the power tool can differ from
the declared total value depending on the
ways in which the tool is used. The need
to identify safety measures and to protect
the operator are based on an estimation
of exposure in the actual conditions of use
(taking account of all parts of the operating
cycle, such as the times the tool is switched
off, when it is running idle, in addition to
trigger time)
OPERATING INSTRUCTIONS
Note: Before using this tool, read the
instruction manual carefully.
BEFORE USE
A Battery Pack must be inserted into the
tool as detailed below. It is important that
the Battery Pack is of the designated type
recommended for this machine. Newly
purchased Battery Packs do not come
fully charged. Please refer to the PURE
CHARGER MANUAL for full details on how
to charge the Battery Pack for this machine
1. INSTALLING OR
REMOVING THE BATTERY PACK
Check that the battery pack is of the
designated type for this machine. We
recommend that the slide switch is locked
in the OFF position when removing or
inserting the Battery Pack. Refer to section
2 below.
a. Slide the Battery Pack into the base of
the tools handle. The Battery can only fit
one way round.
b. Gently push the Battery Pack fully into the
tools handle to engage the locking tabs. The
electrical connections inside the handle will
be made automatically.