SECTION G:
Conversion to Pureh2o
Once commissioned remove the mains
water supply to the QT-553B “pure inlet”
and reconnect using a supply of purified
water. Minimum 2Bar pressure
requirements to max 3Bar.
————————————————————
SECTION H:
Optimum setting for mains Hot & Cold
water
Finally, adjust the flow rate of the mains
hot and cold down to a point where it
doesn’t splash when washing hands. The
flow should be smooth, calm and have a
cone at the top. If the tap jet (inner
diffuser) becomes blocked with particles,
remove and clean and replace.
————————————————————
COMMISSIONING GUIDE
