9
MODEL# 9007PJ
Step 2:
ONLY USE THE INCLUDED SPRING TOOL TO ATTACH SPRINGS. WEAR GLOVES
AND TAKE CARE TO AVOID PINCH POINTS WHEN ATTACHING SPRINGS.
Once the Trampoline Frame is assembled, unfold the Jump Mat (03) in the center of the Frame.
IMPORTANT
: Note that the Front and Back Rails (02) have 8 Spring Holes, and the Side Legs (01)
have 7 Spring Holes. Orient the Jump Mat so that the sides with 8 V-Rings match up to the
corresponding number of Spring Holes in the Frame.
Locate the Spring Tool (06) and 30x Springs (09) to begin attaching the Springs to the Trampoline
Frame. It is suggested that you begin by attaching 1x Spring as close to the center of each Frame
Piece as you possibly can to keep the mat centered. As you continue to add more springs, try to
keep the tension on the mat even by placing springs directly across from each other. When complete,
fold and smooth the protective spring skirt down to the Trampoline Frame, so it resembles Diagram B.
A.
8 SPRING HOLES
7 SPRING HOLES
B.
Step 2:
ONLY USE THE INCLUDED SPRING TOOL TO ATTACH SPRINGS. WEAR GLOVES
AND TAKE CARE TO AVOID PINCH POINTS WHEN ATTACHING SPRINGS.
Once the Trampoline Frame is assembled, unfold the Jump Mat (03) in the center of the Frame.
IMPORTANT
: Note that the Front and Back Rails (02) have 8 Spring Holes, and the Side Legs (01)
have 7 Spring Holes. Orient the Jump Mat so that the sides with 8 V-Rings match up to the
corresponding number of Spring Holes in the Frame.
Locate the Spring Tool (06) and 30x Springs (09) to begin attaching the Springs to the Trampoline
Frame. It is suggested that you begin by attaching 1x Spring as close to the center of each Frame
Piece as you possibly can to keep the mat centered. As you continue to add more springs, try to
keep the tension on the mat even by placing springs directly across from each other. When complete,
fold and smooth the protective spring skirt down to the Trampoline Frame, so it resembles Diagram B.
A.
8 SPRING HOLES
7 SPRING HOLES
B.
ASSEMBLY INSTRUCTIONS
STEP 2:
NOTE:
Only use the included spring tool to
attached springs. Wear gloves and take
care to avoid pinch points when attaching
springs to the trampoline.
Once the Trampoline Frame is assembled,
unfold the Jump Mat (Part 3) in the center
of the Frame.
NOTE:
The Front and Back Rails (Part 2) have 8
Spring Holes, and the Side Legs (Part 1)
have 7 Spring Holes.
Orient the Jump Mat so that the sides with
8 V-Rings match up to the corresponding
number of Spring Holes in the Frame.
Locate the Spring Tool (Part 6) and 30x
Springs (Part 9) to begin attaching the
Springs to the Trampoline Frame.
It is suggested that you begin by attaching
1x Spring as close to the center of each
Frame Piece as you possibly can to keep
the mat centered.
As you continue to add more springs, try
to keep the tension on the mat even by
placing springs directly across from each
in a clock-wise motion.
When complete, fold and smooth the
protective Spring Skirt (Part 19) down to
the trampoline frame as shown.
8 Spring
Holes
7 Spring
Holes
