7
MODEL# 9005MTH
ASSEMBLY INSTRUCTIONS
STEP 4:
Parts:
Part 14 (x2) - T-Section Leg Tube
Locate the appropriate openings to insert
the T-Section Leg Tubes on to the frame.
Make sure to align the opening on the
frame pad to the T-Section to install the
Enclosure in Step 5
(14)
(13)
(13)
(12)
(12)
(X1)
(X1)
(11)
(11)
STEP 5:
Parts:
Part 11 (x4) - M5 x 45mm Bolt
Part 12 (x4) - Nut
Part 13 (x4) - Nut Cap
Part X1 (X4) - Washer
Before you place the Frame Pad back on top
of the Top Rail, Secure both T-Section Leg
Tubes by using 4x M5x45mm Bolts (Part
11) by sliding from the top of the T-Section.
Secure with 4x Washers (Part X1), 4x Nuts
(Part 12), and 4x Nut Caps (Part 13).
Make sure both T-Section Legs are secure
and all Legs are facing the same direction.
NOTE: All bolts must be inserted from the
top square openings of the T-Section so the
flatheads are under the frame pad. Failure
to do this might result in injury if installed
incorrectly.
