7
MODEL# 9040MT
ASSEMBLY INSTRUCTIONS
STEP 3:
A. Flip the Frame & Jump Mat in order to
place the Frame Pad (Part 9). The Frame
Pad must completely cover the springs
and Frame to avoid injury
Once the Frame Pad is placed and snug, flip
the frame again so the Jump Mat faces the
ground to begin installation of the legs
.
(9)
STEP 4:
NOTE:
If the Caps from the Leg Poles are
not already placed after unboxing, make
sure to insert them on the opposite side of
where the openings are located.
Repeat this process until you have all six
assembled Legs with Caps (Part 10).
(10)
x6 Assembled Legs
