STEP 1
With the Backrest Cushion (1) facing the floor, attach one of the
Leg Frames (3) by aligning the openings at the bottom of the
backrest cushion to the openings of the Leg Frame like diagram
below.
Tighten in place with the M10x16mm Bolt (6) and M10 Washer (10)
turning it clockwise until tightened.
Repeat this on opposite side of Backrest Cushion to have 2 leg
frames attached to Backrest Cushion.
STEP 2
Attach the Base Frame (2) to the Leg Frame
(3) with M10 Nut (8) M10 Washer (10) and
M10x65mm Bolt (5) and insert them through
the Base Frame and the Leg Frame like
shown.
Repeat this on the opposite side.
NOTE: Make sure the holes on
the Leg frames are furthest away
from the backrest cushion. You
will attach this later.
ASSEMBLY INSTRUCTIONS
To assemble the product properly, you must follow all instruction steps below. Do not attempt to alter any frame components or parts or
skip any steps below. Use gloves to protect your hands from pinch points during assembly.
7
Model# 8741FB
