12
13
Placement of the Electrode Pads for EMS Treatment
EXTRA FEATURES
Treatment Time
The device offers 12 pre-set times: 5, 10, 15, 20, 25, 30, 35, 40, 45, 50, 55 and
60 minutes. Time will countdown on the display in 1-minute increments for the
duration of your session.
To select a Treatment time:
1.
Press MODE. The pre-set (default) treatment time will flash on the display.
2. To increase or decrease the treatment time, press the button ON + (to
increase) or the button OFF – (to decrease) repeatedly until the desired
duration appears on the display.
3. Press MODE again to save your selection. The treatment time you selected
will appear on the display the next time you turn the device on.
▲
Note: If you change programs during the course of a therapy session, the
treatment time will not reset unless you manually reset it by performing the
steps described above.
Lock Function
Press and hold the ON + and OFF – keys simultaneously for 1 second to lock/
unlock the device.
Automatic Shut off
The device automatically turns off when no button is pressed for 60 seconds.
The device automatically turns off when the time for your therapy session has
elapsed.
Intensity Level Reset
For your safety and comfort, the intensity level will reset to 0 each time the
device turns off, including after therapy sessions.
Low Battery Status Indicator
The battery status indicator will light whenever the battery is low. This means
that you will have to replace the batteries shortly.
Note:
Always start with a low intensity level, increase gradually. You may use
any of the modes for EMS.
.
14
15
