8
9
PurePulse Duo TENS Treatment Program Modes
Program/
mode
Benefits
You should feel
P1
For temporary relief of pain
associated with sore and aching
muscles in the lower back due
to strain from exercise or normal
household and work activities.
For temporary relief of pain
associated with sore and aching
muscles in the upper and lower
extremities ( arm and/or leg) due
to strain from exercise or normal
household and work activities.
Continuous comfortable tingling. The
underlying pain should decrease
gradually after treatment.
P2
Comfortable pulsing sensation.
The underlying pain should decrease
almost immediately.
P3
Comfortable pulsing sensation. The
underlying pain should decrease almost
immediately.
P4
Variable comfortable tingling and pulsing
sensation (sensation should appear to
come in waves).
Pain should ease and there should be
relief after treatment.
P5
Variable comfortable mild tingling
sensation (sensation will appear to
come in waves).
P6
Variable comfortable pulsing and
pumping action (action will appear to
come in waves).
P7
Variable comfortable tingling and
pumping action (action should appear to
come in waves).
P8
For symptomatic relief and
management of chronic,
intractable pain and relief of pain
associated with arthritis.
For pain relief associated with muscle
groups, helps prevent accommodation
or habituation
Turning Off the Device
1. The device turns off automatically
after the therapy session time has
elapsed.
2. To turn the unit off manually, hold the
OFF- button for three (3) seconds.
The display will go blank and the
device will turn off.
3. In an emergency, you may also pull
the connector(s) from the PurePulse
Duo.
▲
Note : To prevent unpleasant electric
shocks, never remove the pad while
the device is still turned on.
Using PurePulse Duo for TENS
Treatment
The PurePulse Duo offers eight different
pre-set treatment programs for TENS
therapy. The programs differ with respect
to varying pulse widths and frequencies.
The mode setting depends on the user
preference and condition. To select your
preferred mode, use the following steps:
1. Press MODE the pre-set (default)
program will flash on the display
(fig.1).
2. To increase or decrease the Program,
press the button ON + (to increase)
or the button OFF – (to decrease)
repeatedly until the desired treatment
mode is displayed (fig.2).
3. Press MODE again to save your
selection. The program you selected
will appear on the display the next
time you turn the device on.
Selecting TENS/EMS Mode
1.
Press MODE after treatment time
is set. The preset (default) therapy
mode TENS or EMS will flash on the
display. Use ON + or the button OFF
– , if you would like to change the
therapy mode.
2.
Press Mode again, the numeric
number of program is then flashing.
Press the button ON + (to increase)
or the button OFF – (to decrease)
for choice of program of the selected
modality.
3.
Press MODE again to save your
selection. The treatment time you
selected will appear on the display
the next time you turn the device on.
▲Note : If you change programs during the
course of a therapy session, the treatment
time will not reset unless you manually reset
it by performing the steps described above.
Selecting the Therapy Intensity Level
1. Intensity is adjustable within each channel
separately. Select the channel you wish
to adjust by pressing CH1 or CH2. “CH1”
or “CH2” will flash on the display.
2. To increase or decrease the intensity,
press ON + (to increase) or OFF – (to
decrease) repeatedly until the desired
intensity level flashes on the display.
▲
Note
: You will feel the intensity increase or
decrease as you select the intensity level.
You can use this as a guide to select a
level that is comfortable for you.
3. Press MODE to save your selection.
10
11
