9
8
CONTROLS & SETTINGS
Power Control –
Press the power button to turn on the air purifier.
Timer Control –
The air purifier can be programmed to turn off after
a preset amount of time. Press the TIMER button to program the
timer to run 2 hours, 4 hours, or 8 hours.
Ionizer –
Press the ION button to turn the feature on. Press it again
to turn it off.
Fan Speed Control –
The air purifier has 3 different speeds of
cleaning,1 (LOW), 2 (MED) and 3 (HIGH). Press the SPEED button
to cycle through the settings and select the fan speed you desire.
The current speed setting will be illuminated on the LED display.
Auto Mode –
The air purifier is equipped with an air sensor that
monitors the quality of your air. Press the SPEED button until the
AUTO light illuminates to activate the air monitoring system. The
monitor will test the air quality and automatically adjust the fan speed
to remove air contaminants. The front of the display is equipped with
LED lights to notify you of the air quality. RED is for poor, ORANGE
is for fair and BLUE is for good quality air.
Change Filter Indicator Lights –
When the HEPA indicator light
turns red, it is time to replace the True HEPA filter. When the PRE
indicator light turns red, it is time to replace the Activated Carbon
Pre-filter. To reset the filter indicator light, press the TIMER and UV
buttons together for 3 seconds. The Change Filter light will flash 3
times and then turn off completely, indicating the unit has been reset.
Sleep Mode –
Sleep mode dims the control panel light while you
sleep. To turn on sleep mode, simultaneously press the ION and
SPEED buttons. In sleep mode, only the SLEEP
indicator light will
be dimly illuminated. To turn off sleep mode, press any button.
UV Control –
Press the UV button to turn on the UV lamp and the
photocatalyst filter.
OPERATING PUREZONE ELITE
•
Place the air purifier on a level surface near a 120V outlet. Take
care to follow all the warnings in the “Warnings and Precautions”
section of this manual).
•
Position the air purifier at least 12" from the wall and plug it in.
•
For your safety:
1. DO NOT place near fans.
2. Keep both sides of the unit at least 12" away from a wall.
3. DO NOT place the unit near curtains.
4. Placing the unit close to the source of air pollution is an
effective way to improve indoor air quality.
Note:
DO NOT run the air purifier with a broken filter. Replace the filter if
the filter has a tear or a hole in it.
If the filter is damaged or needs replacement, please visit
pureenrichment.com to order a replacement filter.
