Pure Digital Fiberlink 7235, Руководство пользователя

Страница: 8 / 12

Miscellaneous:
Viewable PDP input ................. Select “Input 3” from PDP menu
Operating Temp. Range ........... -20 to +50 degrees C
Operating Power ...................... Internally powered by PDP
Loss Budget and Maximum Transmission Distance:
Wavelength Loss Budget (in dB) Distance* (in km)
1310 MM 0-15 0-0.75
1310 SM 0-15 0-30
*Distance specifications are only approximate and are not
guaranteed. Operating loss budget must not be exceeded.
5
Class I Laser Product complies with FDA perfor-
mance standard for laser products, Title 21, Code
of Federal Regulations, Sub-Chapter J
DANGER! The transmitting element in the Pure Digital
Fiberlink 7235 receiver card contains a solid state Laser Diode
located within the optical loop-through output connector. The
laser emits invisible infrared electromagnetic radiation which
can be harmful to human eyes. The radiation from this optical
connector, if viewed at close range without a fiber optic cable
connected to the optical connector, may be of sufficient inten-
sity to cause instantaneous damage to the retina of the eye.
Direct viewing of this radiation should be avoided at all times.
System Connections:
The external output connections for the Pure Digital Fiberlink
®
7235
model are as follows:
Audio Connector OUTPUT: 2 position RCA jack
Video Connector OUTPUT: HD-15F connector
Video Pin Out: RGBHV
1 Red Out
2 Green Out
3 Blue Out
4 N/C
5 Ground
6 Ground
7 Ground
8 Ground
9 N/C
10 Ground
11 N/C
12 N/C
13 Hor. Sync. Out
14 Vert. Sync Out
15 N/C
8
6. When power is applied, the green POWER LED on the 7235card
will light, indicating the presence of operating power.
7. The VIDEO, AUDIO and TX LEDs will give an indication as
described on page 9.
8. Using the PDP’s operational control menu, switch the input to #3.
The system is operational if you see the video and hear the audio
from the 7235 receiver card.