Pure Digital Fiberlink 7235, Руководство пользователя

Страница: 7 / 12

1. Before installing the 7231 card, use a wiping cloth with rubbing
alcohol to remove any possible dust on the PCI connector. Using a
dry towel may cause a malfunction due to static electricity.
2. During installation, it is likely that you will place the PDP in the
prone position (PDP glass on bottom side). To protect the glass from
any damage, lay a mat or cloth in the area where you plan to work.
Make sure it is free of any debris that might cause scratches. Also, be
sure that the working area can support the weight of the entire front
case of the PDP.
3. Do not modify a 7231 receiver card. It may cause a malfunction or
breakdown.
4. Do not modify or damage the inner side structure of the PDP.
5. When installing a 7231 receiver card, be extremely cautious of static
electricity and the damage that it may incur. Do not touch any
components on the receiver card!
6
INSTALLATION INSTRUCTIONS
The following instructions explain how to:
1. Install the Pure Digital Fiberlink
®
7231 plug-in card into the
expansion slot within a Pioneer PDP
2. Make fiber connections between the 7231 card and a 7220 Series
transmitter
3. Operate the system.
Before proceeding, please make sure that the Pioneer PDP is turned
off, the power cable is disconnected and that no devices are connected
to the PDP.
Also, please take a moment to read the following precautions regard-
ing handling of the card, the PDP and the installation process.
6. This product is not manufactured for repeated insertion and extrac-
tion. Please be especially careful when inserting or extracting the
product from the PDP.
Inserting the Card:
1. Remove and save the screws at both ends of the slot cover, located on
the bottom of the Pioneer PDP. Remove the slot cover.
2. Align the board of the 723 5 card with the rails on both sides of the
PDP slot.
3. Carefully and gently slide the 723 5 card into the PDP, making sure
to keep the card straight. If the card is inserted at an angle or with too
much force, you may damage the card or the PDP.
4. After the card is fully and firmly inserted, use the screws that were
removed in step 1 to secure the 723 5 card.
Connecting the System:
1. If using the external outputs on the 723 5 card, connect the RGBHV
and Audio outputs to an additional display and amplified speakers or
to other devices.
2. Make sure the RGBHV and Audio inputs are connected to the 7220
Series transmitter unit.
3. Connect fiber optic cable from the optical output of the 7220 Series
transmitter to the optical input of the 723 5 receiver card.
4. If using the drop-and-repeat function, connect fiber optic cable from
the optical output on the 7235 card to the optical input on any 7220
Series receiver. If connecting to another 7235 card or a 7225 or 7227
receiver, repeat this step as many times as necessary. If the optical
output on the 7235 card will not be used, be sure to leave the protec-
tive cap in place.
5. Apply power to the 7220 Series transmitter, the PDP and all daisy-
chained devices.
7