7
If no stations are found, you see the message ‘No stations available’ and the display shows an option menu,
see
If no stations are found during the autotune
on page 6 for details of this menu. Check your aerial is fully
extended and try one of the available tuning options.
Tuning aid
- See
DAB Tuning aid
on page 12 for details of using the tuning aid to improve reception.
Autotune local
- See
Retuning your unit
below for details of the local autotune option.
Autotune full
- See
Retuning your unit
below for details of the full autotune option.
Retuning your unit
You can re-tune your unit at any time using the autotune process. You may wish to do this if a new multiplex is launched
or you move your unit to another room. You do not need to perform an autotune to pick up new stations within a
multiplex you are listening to as your EVOKE-2 monitors and refreshes the list of available stations automatically. The
following two options are available:
Autotune local
- scans all frequencies in the UK channel allocation. This should only take a few seconds.
Autotune full
- scans the full range of digital frequencies in Band III. This may take a minute or more.
1. Ensure your EVOKE-2 is switched on and the aerial is connected and fully extended.
2. If in FM mode, select DAB mode by pushing the
DAB/FM
button.
3. Push and release the
Autotune
button once for local scan or hold down for around two seconds for a full scan.
Note
You can cancel Autotune by pushing the
Autotune
button again during the tuning process.
The display will indicate tuning is underway. When finished, the EVOKE-2 will return to the station you were
listening to and you will hear it through the speakers. All the DAB stations found are now stored in the unit and
you can select another station as described in
Selecting a station
on page 8.
Tuning in FM mode
Select FM mode using the
DAB/FM
button. Push the
Tune
button to switch between manual and seek tuning.
Seek Tuning
- turn the
Tune
knob in the direction you want to search. EVOKE-2 stops at the first station it finds. Repeat
to find the next station.
Manual Tuning
- turn the
Tune
knob until you reach the frequency to which you want to listen. The frequency changes
in steps of 0.05MHz.
