– 11 –
Replacing The Filters
TO REPLACE THE CARBON PRE-FILTER
1. Unplug the air purifier.
2. The dual-filter is located near the base of the air purifier. To release the
base from the air purifier body, slide the lock on the side of the base to
the right and lift off the body of the air purifier.
3. The Activated Carbon Pre-Filter wraps around the True HEPA Filter and
is secured with a hook and loop closure. Set the base on a level surface,
and remove the Activated Carbon Pre-Filter.
4. Attach the new Activated Carbon Pre-Filter by wrapping it around the
HEPA Filter and securing it with its hook and loop closure.
5. Reattach the body of the air purifier to the base, and slide the lock on the
base to the left to secure.
TO REPLACE THE TRUE HEPA FILTER
1. Unplug the air purifier.
2. The dual-filter is located near the base of the air purifier. To release the base from the air
purifier body, slide the lock on the side of the base to the right and lift off the body of
the air purifier.
3. The Activated Carbon Pre-Filter wraps around the True HEPA Filter and is secured with
a hook and loop closure. Set the base on a level surface, and remove the Activated Carbon
Pre-Filter and True HEPA Filter.
4. If you are not replacing the Activated Carbon Pre-Filter at this time, set it aside on a clean
surface. Remove the protective cover from your new True HEPA Filter and insert the filter
into the base.
5. Reattach the Activated Carbon Pre-Filter, wrapping it around the new True HEPA Filter
and secure it with the hook and loop closure.
6. Reattach the body of the air purifier to the base, and slide the lock on the base to the
left to secure.
7. Plug the power core into an electrical outlet and turn on.
8. Press the FILTER LIGHT button for 3–5 seconds to reset the filter-replacement indicator.
WARNING!
Disconnect power before changing filter.
WARNING!
Do not operate the air purifier without the filter installed.
NOTE: Replacement filters, and video instructions for replacing them,
are available at thepurecompany.com/support.
