PurATron Best Air, Руководство пользователя, Страница: 6 / 12

GENERAL MAINTENANCE (CONT.)
CLEANING THE HEPA FILTER
You have two options to clean the HEPA filter:
1. When visibly dirty, simply remove the HEPA filter from the
unit, and with a hand-held vacuum, remove the heavy
particulate. This method will extend the life of the HEPA.
2. If step one doesn’t clean the filter, Remove the HEPA
filter from the unit, carefully Vacuum, then wash in hot
water. Allow to dry prior to reinstalling, Replace if damaged.
CHANGING THE PCO CELL:
The PCO cell should be changed when REPLACE PCO
CELL appears on the display, or every two(2) years,
whichever comes first. To change the PCO cell, follow the
instructions on pages 7.
CHANGING THE FUSE:
The fuse may be accessed by unplugging the cord from the
back of the unit, removing the back cover of the unit, then
pulling, or if necessary, gently prying the fuse out using a
small, straight screwdriver.
CLEANING THE PURIFIER PLATE:
Remove the HEPA filter. Carefully remove the purifier plate
from the plate guide by grasping the middle of the edge
nearest to you and slowly pull it straight out.
If you are in an environment where there are fats, oils, or
grease, such as in kitchen, start by cleaning with alcohol
and a soft bristle brush. This will cut the grease without
leaving a residue.
For all applications - Clean with a mixture of one part water
and one part ammonia to remove contaminants. Place the
plate into a shallow dish, and pour enough of the
water/ammonia solution into the dish to just cover plate.
Allow the plate to soak for no more than 10 minutes.
CAUTION: Damage may result from soaking the purifier
plate longer than 10 minutes
110 volt models -
use 1.6 Amp slow blow fuse
SEE PAGE 7 FOR REMOVAL AND INSTALLATION INSTRUCTIONS
See next page for back cover removal instructions
6