PurATron Best Air, Руководство пользователя, Страница: 4 / 12

GENERAL OPERATION
The unit can be operated using either the remote or the control panel on the front of the unit. Both the remote and the control panel
have the same functions.
1. TURN ON THE AIR PURIFIER:
Press POWER button to turn the unit ON and OFF. The
UVC and Ionizer will automatically turn on when the
POWER button is pressed.
2. ADJUST THE AIRFLOW SPEED:
Press Fan Up and/or Fan Down buttons to adjust the
airflow speed from Speed 1 to Speed 5.
3. SET THE AIR PURIFYING STAGE:
Press Purify Up and Purify Down to adjust the purification
level to its lowest setting (250 ft2 ) for the first 24 hours of
operation. Then gradually adjust up (if needed) to the
square footage of the indoor area.
NOTE: If you are continuously operating your central heating
and air conditioning fan, or other ventilation system, set the
coverage up to the total ventilated indoor area or set the
coverage up to the size of the room . Do not exceed the size
of the ventilated indoor area when setting the purifier level.
4. SET THE HIGHEST EFFICIENT MODE:
Press SANI+BOOSTER button to turn on and adjust the
timer for the AWAY MODE function. Pressing the
SANI+BOOSTER button once from the original condition
will set 0.5 hour running at the mode, pressing it twice
will be 1 hour, pressing the button three times
will operate the mode for 2 hours . Pressing it four times
will set the unit back to normal mode . The covering area
at this mode will be up to 3000 square feet.
The SANI+BOOSTER function should be operated in
unoccupied areas only.
5. RESET THE MAINTENANCE AND SERVICE TIME:
Press REMINDER RESET button on the control panel or
the button RESET on the remote to reset original
maintenance and service time after you perform the
maintenance . .
Sani Booster
ON/OFF
BEST AIR
POWER
FAN PURIFIER
REMINDER
RESET
SANI+BOOSTER
Sani Booster
ON/OFF
Sani Booster
INDICATOR
LCD DISPLAY
4