6
Performance Data Sheet:
Note: Read this performance data and compare the capability of this system with your actual water treatment
needs. It is recommended that, before installing the system, you have your water supply tested to determine
your actual water treatment needs.
This system conforms to NSF/ANSI 42 and CSA B483.1 for the specific performance claims as verified and substantiated by test data.
While testing was performed under standard laboratory conditions, actual performance may vary.
This system has been certified by NSF International according to NSF/ANSI 42 and CSA B483.1 for the reduction of substances listed
below. The concentration of the indicated substances in water entering the system was reduced to a concentration less than or equal
to the permissible limit for water leaving the system as specified in NSF/ANSI 42.
PUN1FS with PUNCRB Filter
Substance
Average Influent
Challenge
Concentration
Percent Reduction
Requirement
Percent Reduction
1
NSF Standard 42
Chlorine
2.0 mg/L ± 10%
≥
50%
91.8%
Particulate Class III
10,000/mL
≥
85%
99.9%
Flow Rate =1 gpm (3.78 lpm) Capacity = 3000 gallons (11,350 L) or 6 months
Manufactured and warranted by GHP Group Inc.
USA: 6440 W. Howard St. Niles, IL 60714-3302
Canada: 271 Massey Rd. Guelph, Ontario, N1K 1B2
Tested by NSF International according to NSF/ANSI Standard 42 and CSA B483.1.
1
Replacement Parts List:
Item Description
Part #
1
Filter Cartridge
PUNCRB
2
Small O-Ring, Filter Sump
VWC10012
3
Large O-Ring, Filter Sump
VWC10013
4
Sump Wrench
VWC10007
1
4
3
2
