9
OPERATION
Check your local/national mains voltage.
Heater should be used with ground plug.
Only use in protected facilities for open areas.
Pay attention to section 737 of DIN VDE when the device is mounted in open
areas and use special cable suitable for outer use in these environmens.
When the heater is operated for long period, front protective shutter will
extensively get hot. Do not touch the grill during that time.
THERMOSTAT KNOB POSITIONS
Turn the thermostat switch to max or min. position to turn on or turn off the unit.
If the unit is not used for a long period, or while replacing the unit, the cable must be unpluged.
When the thermostat button is set to the desired temperature degree, it will activate with half-
power and full-power in order to fix room temperature.
To completely switch off the device, unplug the device.
ASSEMBLY AS PORTABLE HEATER
- Heater should be mounted to standing in a horizontal
position.
1 – Mount foot pipe to foot base.
2 – Fix body holding L sheet metal on body.
-Read the safety instructions for long lasting usage of your appliance.
- Do not switch on your heater in vertical position, do not move it while it’s on.
- Please contact our authorized technical service, if there is cord damage or any other problem
with the heater.
- Do not repair the heater by yourself or get unauthorized persons to fix it.
- The malfunctions that occur due to the interference of unauthorized persons or due to the
misusages are not covered by the guarantee. Our company is not responsible for this kind of
malfunctions. In these cases, the guarantee will be regarded as invalid even if the guarantee period
has not expired. In accordance with the amount of dust and dirt, we recommend you to clean the
reflective part of the appliance with a long-stemmed fine dusting brush.
- In case it is disassembled by an authorized technical service for any purpose, the appliance can
be cleaned with a damp cloth that doesn’t leave any dust residue. Do not use combustible and
inflammable materials to clean the heater.
- Do not cover the heater when it’s on. This may cause fire hazard due to the overheating of your
device.
- If the heater will not be used for a long time, it is recommended to unplug the cable, wrap the
appliance carefully and store it horizontally and in an appropriate dry and flat surface.
