![Pur Line DESAIR-12 Скачать руководство пользователя страница 6](http://html1.mh-extra.com/html/pur-line/desair-12/desair-12_user-manual_1626014006.webp)
CLEANING THE APPLIANCE
Switch off (humidity control switch ) and remove the mains plug from the
socket.
Empty the water tank.
Clean the air dehumidifier with a damp cloth, if required with some liquid
detergent. Do not use scourers ,abrasives, acetone, gasoline petrol etc.
Leave the appliance to stand for one hour before connecting to the mains
supply, if it has been titled or knocked against during cleaning.
AUTOMATIC SWITCH-OFF
When the humidity control switch is turned on the air dehumidifier will
continually monitor the humidity level in the room. As soon as the humidity
level falls below the selected level the compressor will automatically switch
off. The compressor will automatically switch on again when the humidity
exceeds the selected level.
For optimum safety, the appliance will also switch off automatically.
1 If the water tank is full (approx. 3.5 liters.)
2 If the water tank is removed
HOW THE AIR DEHUMIDIFIERS WORKS
The fan draws the humid air first through the air inlet filter and then through
the metal radiator. This radiator is cooled by a compressor. The water
condensates and drips into the water tank .The dried air is expelled into the
room. The air dehumidifier can automatically maintain the relative humidity
at a pre-selected level in rooms up to 100 cubic meters.
The appliance is able to extract up to 14 liters of water per day
(30 C /86 F, relative humidity = 80% ).
The air filter removes and collects airborne dust.
Whilst in operation, the appliance produces some heat which may raise the
room temperature by 1~2 C (or approx. 3 F)
HOW THE AUTO DEFROST WORKS
When the temperature is under 12 C, the evaporator will start to frost and
affect the dehumidifying result. This unit will defrost automatically once
each hour, and the defrost pilot indicator will light up.
HOW TO USE CONTINUOUS DRAINAGE
To use continuous drainage remove the rubber cap from the continuous
drainage port located on the back of the unit. Transfer the rubber cap to the
tank drainage outlet and replace the water tank. Finally attach an 11mm I/D
PVC hose to the continuous drainage port ensuring the hose is directed
downwards, allowing water to flow by gravity to an external drain.
Содержание DESAIR-12
Страница 3: ......