Pur Line DESAIR-12, Руководство пользователя

Страница: 5 / 7

PUTTING INTO OPERATION
Place the air dehumidifier on a flat and even floor. Allow 20 cm (8”) free
space around the appliance. Select a place away from a heat source and
not in direct sunlight, preferably close to an earth wall socket Connect the
air dehumidifier to earth wall socket. Then turn the humidity control switch
clockwise to desired humidity and the air dehumidifier starts running.
Note: If the pilot fails to illuminate, please check if the water tank is not
correctly seated, pull out the water tank gently and put it back again firmly.
EMPTYING THE WATER TANK
Empty the water tank regularly. When full, the air dehumidifier switches off
automatically and tank full pilot comes on.
Hold the handle of the water tank .
Lift slightly and pull out carefully .
Empty the water tank.
Put the water tank back.
The air dehumidifier can drain water continuously with 11 mm diameter
drainage hose.
Do not move the appliance if the water tank is removed.
REPLACEMENT AND MAINTANCE OF AIR FILTER
Check the air filter regularly. Clean as soon as it has become dirty.
If the air passage through the filter is blocked, the air humidifier cannot
function properly.
Hold the air filter by the handles and pull outward.
For easy cleaning of filter screen, use a vacuum cleaner or rinse lightly
with water (no chemicals).
Do not forget to re-install the filter after cleaning.
To ensure best performance clean air filter every 1-2 weeks.