7
6
Settings
Operation
UPDATE - Short press the encoder button to update the firmware. Follow the
instructions on the screen when updating.
FACTORY DEFAULT
AUDIO – Short press the encoder button to access. Rotate the encoder button to
select YES/NO. Selecting YES will reset your unit back to factory default settings.
SYSTEM - Short press the encoder button to access. Rotate the encoder button to
select YES/NO. Selecting YES will reset your unit back to factory default settings.
Basic Operation
TURNING THE UNIT ON / OFF
Long press the SRC (Power) button to turn the unit ON or OFF
ADJUSTING THE VOLUME
Short press the encoder button to independently adjust the volume for a specific
zone (ZONE 1>ZONE>ALL). Rotate encoder knob left or right to desired volume
level (0-40). The current volume level will be displayed during adjustment.
ADJUSTING THE SUBWOOFER OUTPUT
Press the SUB + or SUB- buttons to adjust the output level (0-20).
ADJUSTING THE SCREEN BRIGHTNESS
Short press the SCREEN BRIGHTNESS button to adjust the brightness level.
There are two brightness levels.
SELECTING A SOURCE TO PLAY
Short press the SRC button to show the different source options (FM TUNER>AM
TUNER>WB TUNER>USB>AUX>BLUETOOTH>PANDORA>SIRIUSXM). Use the
rotary encoder or short press the SRC button to scroll through sources.
SELECTING A ZONE
Long press the encoder button to toggle between source zones (ZONE 1>ZONE 2)
Tuner Operation (FM/AM/WB)
To operate, use the rotary encoder to select the tuner source you want to listen to
(FM>AM>WB).
To AUTO SEEK stations, short press the FWD and REV buttons. To MANUAL
SEEK stations, long press the FWD and REV buttons to tune to the desired
frequency.
To MUTE the TUNER, short press the PLAY/PAUSE button.
FM BAND SETTINGS
To access the FM BAND SETTINGS, short press the MENU when using the FM
TUNER source. This will give you access to the settings specific to the FM TUNER
(FM>PRESETS>ADD PRESETS>REMOVE PRESETS>AUTO STORE>LOCAL).
PRESETS
Short press the encoder button to access the PRESETS list. Using this feature
allows to you see what PRESETS are saved on the unit.
ADD PRESETS
Short press the encoder button on the ADD PRESETS option. You will need to be
on both the station and PRESET group you want to add first (FM1>FM2>FM3).
Using this feature allows to you save stations to the unit. Once selected, use the
rotary encoder to select the PRESET number (1-6) you want the station saved to.
REMOVE PRESETS
Short press the encoder button on the REMOVE PRESETS option. You will need
to be under the PRESET group you want to adjust first (FM1>FM2>FM3). Using
this feature allows to you remove saved stations on the unit. Once selected, use
the rotary encoder to select the PRESET number (1-6) of the station you want
removed.
FM
Short press the encoder button to access the FM PRESET options
(FM1>FM2>FM3). Using this feature allows to you have separate tuner preset
groups to choose from. Use the rotary encoder button to scroll through the
TUNER groups and short press to select the group.
AUTO STORE
Short press the encoder button to access the AUTO STORE function. You will
need to be under the PRESET group you want to adjust first (FM1>FM2>FM3).
This feature automatically stores presets on the unit. It will stop when presets 1-6
are set. Select the next PRESET group and repeat to fill next set.
LOCAL
Short press the encoder button to access the LOCAL options. Once selected,
use the rotary encoder to select ON or OFF. The local option tunes to nearby
radio stations with sufficiently strong signals for good reception. In areas where
reception is poor, switching to distance tuning enables the unit to tune in to more
distant stations. Distance tuning is the default.
AM BAND SETTINGS
To access the AM BAND SETTINGS, short press the MENU when using the AM
TUNER source. This will give you access to the settings specific to the AM TUNER
(AM>PRESETS>ADD PRESETS>REMOVE PRESETS>AUTO STORE>LOCAL).
PRESETS
Short press the encoder button to access the PRESETS list. Using this feature
allows to you see what PRESETS are saved on the unit.
ADD PRESETS
Short press the encoder button on the ADD PRESETS option. You will need to be
on both the station and PRESET group you want to add first (AM1>AM2). Using
this feature allows you to save stations to the unit. Once selected, use the rotary
encoder to select the PRESET number (1-6) you want the station saved to.
REMOVE PRESETS
Short press the encoder button on the REMOVE PRESETS option. You will need
to be under the PRESET group you want to adjust first (AM1>AM2). Using this
feature allows you to remove saved stations on the unit. Once selected, use
the rotary encoder to select the PRESET number (1-6) of the station you want
removed.
AM
Short press the encoder button to access the FM PRESET options (AM1>AM2).
Using this feature allows you to have separate tuner preset groups to choose
from. Use the rotary encoder button to scroll through the TUNER groups and short
press to select the group.
AUTO STORE
Short press the encoder button to access the AUTO STORE function. You will
need to be under the PRESET group you want to adjust first (AM1>AM2). This
feature automatically stores presets on the unit. It will stop when presets 1-6 are
set. Select the next PRESET group and repeat to fill next set.
Source Unit Settings
To access the source unit’s settings, long press the MENU button until the
options appear. Rotate the encoder to scroll through the list of settings and
short press the encoder button to select the setting you wish to change. (ZON
ES>BALANCE>FADER>AUDIO>VOLTAGE GAUGE>BT PAIRING>BEEP>TUNER
REGION>SOFTWARE>FACTORY DEFAULT)
This source unit has a zero current draw when turned off. All of your settings and
presets will be saved along with your boat’s battery during storage.
ZONES
ZONE 1 / ZONE 2
To setup ZONE 1 or ZONE 2, short press the encoder button to access the
submenu. Rotate the encoder button to select ZONE options. (SOURCE >
RENAME > ENABLE/DISABLE/LOCK)
SOURCE
To select the source, short press the encoder button to access the submenu. Use
the rotary encoder to scroll through EQ Settings. (FM TUNER > AM TUNER > WB
TUNER > USB > AUX > BLUETOOTH > PANDORA > SIRIUSXM)
RENAME
To rename ZONE, short press the encoder button to set the first letter of the new
name. Once active, rotate encoder to adjust letters. Short press the encoder button
again to set the next letter. Repeat until ZONE has been renamed. Short press
MENU to exit and go back up one level.
ENABLE / DISABLE / LOCK
Short press the encoder button to access. Rotate the encoder button to select
ENABLE/DISABLE/LOCK. Selecting LOCK will enable ZONE 2 and LOCK the
source of ZONE 2 to ZONE 1.
BALANCE
Short press the encoder button to access BALANCE adjustment settings. Rotate
the encoder button to set output BALANCE.
FADER
Short press the encoder button to access FADER adjustment settings. Rotate the
encoder button to set output FADER.
AUDIO
To access the AUDIO settings, short press the AUDIO option from the MENU
screen. Rotate the encoder to scroll through the list of settings and short
press the encoder button to select the setting you wish to change. (7 BAND
EQ>CROSSOVER>PEQ>REAR RCA>AUX INPUT>SOURCE GAIN>INTERNAL
AMPLIFIER)
7 BAND EQ
Short press the encoder button to access the 7 BAND EQ settings. Use the
rotary encoder to scroll through the EQ settings. (FLAT > ROCK > CLASSIC >
ACOUSTIC > DANCE > ELECTRONIC > HIP-HOP > CUSTOM) When setting
up the CUSTOM EQ, short press the encoder button to set the first frequency.
Once active, rotate the encoder to adjust the frequency settings. Short press
encoder button again to access the next frequency. Repeat until all EQ settings are
complete. Short press the MENU button to exit and go back up one level.
CROSSOVER
Short press to access the CROSSOVER settings. Use the rotary encoder to select
the crossover zone options (FRONT>REAR>SUB). Short press the encoder to
adjust the frequency of the crossover (60Hz>80Hz>120Hz>APF). Short press
MENU to exit and go back up one level.
PUNCH EQ
Short press to access the PUNCH EQ settings. Use the rotary encoder to adjust
the gain output (0-12). Short press MENU to exit and go back up one level.
Punch EQ is an onboard equalizer with up to +18dB @ 45Hz and/or up to +12dB
boost at 12.5kHz
AUX INPUT
RENAME – To rename AUX, short press the encoder button to set the first letter
of the new name. Once active, rotate encoder to adjust letters. Short press the
encoder button again to set the next letter. Repeat until AUX has been renamed.
Short press MENU to exit and go back up one level.
ENABLE - Short press the encoder button to access options. Rotate the encoder
button to select if unit is discoverable. (ENABLE > DISABLE)
SOURCE GAIN
To adjust the level of device input gain, scroll through the inputs (FM TUNER>AM
TUNER>WB TUNER>USB>AUX>BLUETOOTH>PANDORA>SIRIUSXM) to the
device you want to adjust, short press the encoder button to access the gain
settings. Rotate the encoder button to set the level of gain. (-3dB > -2dB > -1dB >
0dB > +1dB > +2dB > +3dB)
INTERNAL AMPLIFIER
Short press to access the INTERNAL AMPLIFIER options. Use the rotary encoder
to select options (ON>OFF). When using an amplifier to power your speakers,
select OFF. If you are powering your speakers directly from the source unit, select
the INTERNAL AMPLIFIER to ON.
VOLTAGE GAUGE
To display the vehicle voltage, short press the encoder button on the VOLTAGE
GAUGE option.
BT DEVICE PAIRING
Short press the encoder button to access options. Rotate the encoder button to
select if unit is discoverable for pairing. (ENABLE > DISABLE) Once enabled, the
source unit is now discoverable and ready for pairing to your device. Open the
Bluetooth settings on your device to find the source unit labeled “Rockford PMX”
and select.
BEEP
Short press the encoder button to access the BEEP options. Rotate the encoder
button to turn system beep ON/ OFF.
TUNER REGION
To adjust, short press the encoder button to access. Rotate the encoder button to
select the TUNER REGION of your preference. (EUROPE > USA > RUSSIA > LATIN
> ASIA > JAPAN > MIDEAST > AUSTRALIA)
SOFTWARE
VERSION - Short press the encoder button to display the current firmware version
of the unit.
