PUMP'IN ONE, Руководство пользователя

Страница: 15 / 18

- Once the desired pressure has been reached, press the
compressor’s power button to position 0 («off») to stop it (see
illustration below).
- If the pressure reached is higher than desired pressure, put the
compressor in position 0 («Off») to stop it, then evacuate the air by
briefly pressing the decompression button. Repeat until the desired
pressure is reached.
- Quickly remove the connector from the valve.
- Replace the cap on the valve.
- Once the compressor has cooled down, wrap the cables and the
hose around the device and store it in its storage bag.
Various inflations
- Select the appropriate adapter (supplied with the device) and insert
it into the air hose nozzle.
- Insert the adapter into the inflatable object’s appropriate socket.
- Connect the compressor’s power supply cable to the appropriate
power source.
- Press the compressor’s power button to position 1 («On») to turn it
on.
- Inflate the object according to the instructions of the inflatable object
Warning:
Inflate your product only according to the
manufacturer’s recommendations.
- Do not exceed the maximum prescribed pressure.
- Press the compressor’s power button in position 0 («Off») to stop it.
- Quickly remove the adapter from the inflatable object and remove
the adapter from the nozzle.