PUMP'IN ONE, Руководство пользователя

Страница: 14 / 18

Conditions of use
The compressor must be installed on a horizontal plane (maximum
allowable inclination of 21 °)
Using the compressor
Warning on car tyres:
Only inflate your tyres recommended by the car manufacturer. These
recommendations can be found in the car’s manual, and / or inside
the driver’s door or on the fuel hatch.
- Using the carrying handle, place the compressor in the location
where inflation will be performed.
- Unravel the power cable starting from the compressor end,
ensuring that the cable is not bent or entangled.
- Connect the 12V DC plug of your compressor to the 12V socket of
your vehicle.
- Start the vehicle’s engine. Be sure to engage the handbrake and
put the gear in neutral.
- If necessary, turn on the lamp by pressing the switch for better
visibility.
- Dust the valve cap or the valve tip if it is not protected.
- Carefully extract the air hose from the compressor.
- Screw the air hose nozzle onto the tyre valve, turning clockwise.
Ensure the nozzle and the valve are correctly connected.
- Press the compressor power button to position 1 («On») to turn it.
Compressor
power supply
« on / off » button on the lamp