PULUZ U6000, Руководство пользователя

Страница: 16 / 20

15
conditions, keep the camera in a warm place prior to use. Shooting at
1
higher frame rates and resolutions increase power consumption.
2
The battery charges to 80% in approximately 1.5 hours and 100% in
3
approximately three hours when using PULUZ’s USB-compatible Wall or
4
other Chargers (5V 1A). No damage occurs to the camera or battery if
5
used prior to full charge.
6
7
REMOVING THE BATTERY FROM THE CAMERA
8
The PULUZ battery is designed to have a tight fit to maximize reliability in
9
high-vibration activities.
10
To Remove the Battery:
11
1. Open the battery cover by placing your thumb in the indentation in
12
the battery cover lock (on the bottom of the camera) and sliding it to
13
the left. Allow the cover to open.
14
2. Grasp the battery pull-tab and remove the battery from the camera.
15
Note: The battery cover small card please put the battery cover key into
16
place, as shown:
17