5
2.2.1 Basic Safety Measures
•
Do not put your hand into the openings of the metal separator. Mechanical forces
which may cause heavy injuries occur on switching of the pneumatic gate.
•
Prior to any maintenance works, disconnect the equipment from compressed air
and power. Make sure that nobody can reconnect compressed air and power
during the maintenance works.
•
Never put the metal separator into operation without the supplied safety devices.
This is of particular significance for the protective grid above the movable
components.
•
Instantly shut-off the equipment if safety devices are not functioning properly or
are damaged.
•
In case of failures due to wearing or ageing, their reasons have to be eliminated
immediately.
•
Schedule sufficient regular maintenance intervals.
•
Always observe the safety instructions fixed to the equipment. They help to avoid
hazards. In no case, these instructions may be removed.
•
Do not put the metal separator into operation if
•
not having received complete instruction by the owner,
•
you have not studied this manual completely,
•
have not understood this manual completely
•
Errors in operation may lead to serious damage of health and property.
Danger!
Avoid touching the electronic p. c. board
Prior to wiring the electronic with peripheral equipment, disconnect the
unit from compressed air and power supply. This will help you to avoid
short circuits.
Static charges must be discharged before starting working.
