Appendix
Page E-4
Operator’s Manual PiCCO
2
Version 3.1
2
Maintenance and Service
2.1
Classification
This product is classified according to Council Directive 93/42/EEC of 14 June 1993 concerning medical
devices, annex IX:
Class II b
2.2
Maintenance
Before commencing monitoring of a patient, check the PiCCO
2
for any mechanical damage, check all input
cables, connectors and accessories and check all functions necessary for patient monitoring.
The PULSION PiCCO
2
and its accessories are maintenance free and are not subject to special intervals of
service if local medical law does not indicate this. For further details about potential difficulties, possible
causes and suggested remedies see chapter C6.2.
CAUTION:
If the PiCCO
2
appears to be damaged, contact your local PULSION representative. Do
not use the PiCCO
2
if the device appears to be damaged. If the system check detects a failure, no
function will be available and “SERVICE” is displayed on the screen. Turn the PiCCO
2
off and
contact your local PULSION representative. Do not attempt to use or repair the PiCCO
2
.
IMPORTANT
Updates and all checks which require the PiCCO
2
to be opened must be made by a PULSION
technician.
For telephone inquiries relating to service, technical support, accessories or other matters contact
PULSION Medical Systems SE.
To respond to questions, PULSION Medical Systems SE will need the serial number of the device
that is found on the rear panel of the PiCCO
2
.
PULSION Medical Systems SE
Hans-Riedl-Str. 17
D-85622 Feldkirchen
Germany
Phone:
+49
–
(0)89
–
45 99 14
–
0
Fax
+49 - (0)89 - 45 99 14
–
18
E-mail:
Internet:
www.PULSION.com
