PulseTec NANO 320 DC, Инструкция по эксплуатации

Страница: 18 / 24

18
4). System Setting
5). SCAN TO GO
A very unique feature of NANO 320 DC is SCAN TO GO (automatically charging system).
As the range of battery types and capacity becomes more and more, each battery requires
its own dedicated charging process. It is easy to set up the charger incorrectly for a specific
type of battery, resulting damage the battery or even cause accident.
The revolutionary SCAN TO GO provides a solution to this problem by allowing the user
to assign a QR Code which contains all the relevant data for the battery for charging or
discharging. The user can create a unique QR Code by using “PULSETEC” app. Print it
and paste it on the battery.
Using your smart phone and launch “PULSETEC” App. Since all the essential information
is stored in the QR Code. All you need to do is press the Scan button, and the charge or
discharge process will start automatically.
Charge
Discharge
5000
mAh
120
Min
50 122
C F
10
Min
11.0
V
Enter into System Setting
Change Password >
SCAN TO GO
NEXT
DISCHARGER
BAL.CHARGE
3
4
CHARGER
2
LiIon
LiFe
LiPo
PROGRAM SYSTEM HOME
Operation
Mode
Battery
Type
Battery
Cells
6
5
Balance Port Enable
PROGRAM SYSTEM HOME PROGRAM SYSTEM HOME
Rest Time Between Cycle
Safety Timer
Capacity Cut-Off
Temperature Cut-Off
DC Input Low Cut-Off
Key Beep
Buzzer
1 5 :5 3
Pulsetec
1 5 :5 3
Pulsetec
1 5 :5 3
Pulsetec
Setting the Charger with the PULSETEC app