4
CONNECT AND OPERATE
1.
Trace and cut out a single-gang hole in a wall and insert a single gang electrical box
2.
Connect speaker and power cables while making sure that power is not active and
the unit is turned off by turning the rotary dial counter-clockwise
3.
Install the PA230BWA into the electrical box in the wall
4.
Connect power on the opposite end and turn on the unit by turning the volume
knob clockwise
5.
Bluetooth (BT) status LED will quickly blink and will be in pairing mode
6.
Search and connect to the Bluetooth labeled: “Pulse BT”
7.
Enter the password that was found on the sticker on the back of the unit before
installing into the wall
8.
For Aux-In source, plug-in audio cable and play
NOTE: Ensure all speaker(s) and power wires are run in accordance to local laws and
regulations. Before inserting the amplifier into the electrical box and wall, either note or
remove the Bluetooth password found on the sticker on the back of the unit.
Side View
To Speakers
Power
Front View
Audio Source