Pulse TREKKER i300, Инструкция пользователя

Страница: 5 / 7

5
12) Microphone Storage
The system has sufficient space to store its own vocal microphone and microphone lead. These are stored in
underneath the flap as indicated.
13) iPod® Dock
An Apple® iPod® compatible dock suitable for most iPod’s®. Remove the rubber protector from the connector and
dock the iPod®. Once docked the support should be adjusted to prevent strain on the 30-pin connector – failure to
do so may result in damage to the system or the iPod’s® connector. Remove the iPod® before transportation.
Trouble Shooting:
•
Distorted Sound
o
Input is clipping: Try lowering the input gain or the volume control on your sound source or music
instrument.
o
Output is clipping: Lower the master volume control
o
Too much bass: Reduce the reduce (cut) the bass signal using the Equaliser controls (4).
o
Check LINK cable: If using two TREKKER i300’s at the same time the LINK cable should only be plugged
into the LINK socket on the master unit and the CD/TAPE Input on the slave. Connecting the LINK of the
slave to the MIC or Instrument inputs will cause distortion.
•
Poor Sound Quality
o
Equaliser settings: If the sound is muffled or lack clarity check the EQ settings, either the bass could be
boosted too high or the MID or HI cut. To correct the sound centre all the EQ settings to the zero point and
adjust further in small increments.
o
Inputs: Check all inputs to ensure they are plugged in as per the instructions in this booklet.
o
Digital Noise: If using the PA system with an iPod® Touch or an iPhone® the device should have the
Airplane mode activated – this will prevent the PA System from picking up digital noise from the device’s
antennae.