should be taken to ensure no bare wires can be touched as this may result in electric
shock.
12)
IEC Mains Inlet – Use only the supplied power cord or suitable replacement with the
correct fuse.
13)
Mains Inlet Fuse – Replace only with the same rating as originally supplied. If the fuse
fails do not replace with a higher value.
Compliance
Compliance
Compliance
Compliance
This equipment is designed to comply with the following standards:
BS EN55103-1:1996 BS EN55103-2:1997 BS EN60065:2002
When this product reaches the end of its life, do not dispose with household waste. See www.recycle-
more.co.uk for details of how to dispose of PULSE products in an environmentally sound fashion, or
contact PULSE directly via www.pulse-audio.co.uk
Amplifier care bullet points.
Amplifier care bullet points.
Amplifier care bullet points.
Amplifier care bullet points.
DO
DO
DO
DO …
…
…
…
1.
Read the manual; understand the operation, limitations and safety instructions before using
the product
2.
Use good quality cables of the correct type, in the correct sockets. Speaker cables should
be manufactured from 1.5mm
2
or larger cable. Keep speaker lengths as short as possible to
minimise signal loss.
3.
Listen to your sound; if it’s distorted, reduce gain, volume or both
4.
Use adequate amplification and speakers for your needs
5.
Checks the mains supply in the venue; use a mains checker.
6.
Ensure your amp, speakers and all cables are free from damage
7.
Protect your amp from moisture, smoke/fog machines and glitter cannons
8.
Make and check all connections before you switch on
9.
Set amp volume to ‘0’ at switch on. Slowly turn up, checking all speakers are working. If
there are problems turn the amp off and resolve them
FFFFOLLOW THE SIGNAL PATH!
OLLOW THE SIGNAL PATH!
OLLOW THE SIGNAL PATH!
OLLOW THE SIGNAL PATH!
•
Source output to mixer/preamp input (shielded signal cable),
•
Mixer/preamp output to power amp input (shielded signal cable),
•
Power amp output to speaker input (unshielded speaker cable).