INSTALLATION GUIDELINES
INSTALLATION GUIDELINES
INSTALLATION GUIDELINES
INSTALLATION GUIDELINES
•
Do not use these amplifiers in damp or high humidity environments. Do not use outdoors or
anywhere where liquids could fall or splash onto the amplifier.
•
Ensure the amp is adequately ventilated, with free airflow to the front and rear panels. Keep
away from other heat sources. If the amps are mounted in a rack with other amps, ensure
there is adequate cool air flow front and rear. Note that air is drawn in through the back
panel, and exhausted through the front panel.
•
NEVER cover the amplifiers, as they may overheat.
•
PULSE power amplifiers are designed to fit standard 19” racks, with a 2U height and 17”
depth. We recommend the use of rear rack supports, especially if the rack is to be mobile.
Use shakeproof washers or threadlock adhesive to prevent mounting bolts becoming loose
in transit.
•
Ensure that the AC power supply is correct for your amplifier. The required AC supply is
stated on the rear panel next to the AC power input.
•
Ensure that you use the correct type of mains lead for your equipment and country. This
must be free from damage and easily accessible during use.
•
Keep away from magnetic recording media (tape, mini disc, hard drive etc). Power
amplifiers produce an electromagnetic field, which could affect stored files.
Wiring Conventions in P
Wiring Conventions in P
Wiring Conventions in P
Wiring Conventions in PULSE Power Amplifiers
ULSE Power Amplifiers
ULSE Power Amplifiers
ULSE Power Amplifiers
Phono/RCA (unbalanced); Tip=Signal Positive. Sleeve=Signal Ground.
XLR (balanced); Pin1=Signal Ground, Pin2=Signal Positive, Pin3=Signal Negative.
Speakon ; 1+=Speaker Positive. 1-=Speaker Negative.