6
PAIRING INSTRUCTION
•
Power on the receiver and the handheld digital wireless microphone or the belt
pack transmitter, then press and hold the pair button on them at the same time for
about five seconds.
•
The LED of the microphone or the belt pack and the volume circle will blink to
show that they are in pairing status.
•
After the pairing is successful both indicators will light constantly.
•
As the system can memorise pairing devices, once they are paired together, they
can be used without having to re-pair them, until you pair the microphone or the
belt pack with another receiver.
•
The receiver can pair with lots of microphones and belt packs, although only one
transmitter (either the microphone or belt pack) can be used at once.
SPECIFICATIONS
Receiver
Frequency
2.404 - 2.476GHz
RF Sensitivity
-78dBm
Transmission Distance >25m (distance insight)
Frequency Response
50Hz ~ 15KHz (16bit 38.4KHz)
Distortion
0.05 @ 1KHz
SNR
>89dB
Transmission Delay
18ms
Power Supply
DC12V 200mA
Microphone/Belt Pack Transmitter
Carrier Frequency
2.404 ~ 2.476GHz
Transmitting Power
10dBm Max ERP (Effective Radiated Power)
Transmission Distance
>25m (distance insight)
Frequency Response
50Hz ~ 15KHz (16bit 38.4KHz)
Distortion
0.05 @ 1KHz
SNR
>89dB
Transmission Delay
18ms
Power Supply
2 x AA batteries
Battery Life
>20 hours
INFORMATION ON WASTE DISPOSAL FOR CONSUMERS OF
ELECTRICAL & ELECTRONIC EQUIPMENT.
When this product has reached the end of its life it must be treated as Waste
Electrical & Electronics Equipment (WEEE). Any WEEE marked products
must not be mixed with general household waste, but kept separate for the
treatment, recovery and recycling of the materials used. Contact your local
authority for details of recycling schemes in your area.
Made in China. PR2 9PP
V 1.0
