4
Rear Panel Controls and Functions
4
5
4. Power input jack
•
Connect the DC plug with the supplied in-line AC adaptor.
5. Mono ¼” jack plug
•
TRS connection used for mono unbalanced audio.
MICROPHONE TRANSMITTER CONTROLS & FUNCTIONS (PWM24-HH)
7
6
6. Power/Pair button
•
Power on/off the transmitter by pressing and holding the button for 0.5 seconds.
•
Pair the transmitter and receiver by pressing and holding the button for about five
seconds.
7. LED indicator
: on - the transmitter is on and/or in pair
off - the transmitter is off
blinking - in pairing status or short of power
8
8. Microphone transmitter battery selection and installation
•
Two alkaline AA batteries are recommended.
•
Ensure that the batteries are inserted correctly, observing the plus and minus
marks on both the batteries and compartment.
•
When the LED is blinking (not in the pairing status), it indicates that the batteries
need replacing immediately.
•
Press the point marked ‘8’ above and slide out the battery cover. Insert two new
AA alkaline batteries as the polarity marks indicate, then replace the battery cover.
