28 |
P a g e
Pulse PFD-2000 Series User Manual
SMTP Server Settings
Enable SMTP
– Checked to enable SMTP
SMTP Server
– The IP or hostname of the SMTP server, for example,
smtp.gmail.com.
SMTP Server Port
– The port of the SMTP server. The PFD-2000DV
supports port 25 and SSL port 465, which is for SMTP with an encrypted
connection.
From E-Mail Address
– The email address that sends out the alarm
email(s).
To E-Mail Address
– The email addresses that the alarm email(s) will be
sent to. You can have up to 3 emails configured.
User Name/ Password
– The user name and password required to log
in to your SMTP server, for example, [email protected]/123.
SSL
– Checked if the SMTP server requires a secure connection.
Test Email Account Settings – Click the Test button to send a test email from the From E-Mail to the To
E-Mail to make sure that SMTP is configured properly. If the receiver can get the test email, then the
SMTP settings are ready to go.
FTP Page
The FTP server is used to store video files if you configure the PFD-2000DV to record video and upload it
to the FTP server when an alarm event or motion detection is triggered.
FTP Settings
Enable FTP
– The default setting is “No,” if you want the PFD-2000DV to upload
the recorded video to the FTP server when an alarm is triggered, set this field to
“Yes.”
FTP Server
– The IP address or hostname of the SMTP server, ie.
ftp.myserver.com.
FTP Server Port
– The port that your FTP server is using.
User Name / Password
– The user name and password required to log into your FTP server
Path
– The directory in the FTP server where recorded video will be uploaded.
