26 |
P a g e
Pulse PFD-2000 Series User Manual
PFD-2000DV Maintenance Page
Server Maintenance
Restart – Click this button to restart the PFD-2000DV.
Restore – Click this button to perform a partial factory reset (The IP
address will not be cleared) .
Restore the Device
Click “Restore” to reset the camera to default factory setting, except IP
Address.
Firmware Upgrade and Provisioning Items
Upgrade via
– This field lets you choose the firmware upgrade method. The PFD-2000DV supports
HTTP, HTTPS and TFTP.
Firmware Server Path
– The IP
address or domain name of the
firmware server (the location of the
firmware files) .
Automatic Upgrade Interval
– Enter
the frequency (in minutes) in which
the HTTP/HTTPS/TFTP server will be
checked for new firmware upgrades
or configuration changes.
Automatic Upgrade
– The default
setting is “No.” Choose “Yes” to
enable automatic. HTTP/HTTPS/TFTP
upgrade and provisioning. When set to “No”, the IP Camera will only perform a HTTP/HTTPS/TFTP
upgrade and perform a configuration check once during the boot process.
