WHAT’s IN THE BOX
BATTERY INSTALLATION
OVERVIEW
IMPORTANT SAFETY INFORMATION
OPERATION
•
The mixer is designed to balance the input from 4 microphones and adjust the output
volume to a recording device or amplifier.
Please read these instructions carefully before use and retain for future reference.
•
With the power turned off and all level controls turned to minimum, connect up to four
microphones to the input jack sockets.
•
Connect the output to the amplifier or the recording device using a suitable cable.
•
Turn the power on and the LED will light.
•
Set the master volume to about half way and adjust each input level as required.
•
When the balance is as required, adjust the master volume to suit the input of the
sound system or recording device.
•
The peak LED should flash briefly on maximum level but not remain lit.
•
If the peak LED lights for longer, reduce the master volume.
•
When using electrical appliances basic safety precautions should always be followed.
•
Do not expose the units to moisture or dust and excessive temperatures.
•
The mixer can be powered either by a 9V PP3 type battery or a 12VDC 200mA PSU
(not supplied).
•
Mixer Unit
•
User Manual
•
Remove the two screws on the battery cover on the base of the mixer, and remove
the cover.
•
Connect the wiring connector to the battery observing the correct polarity.
•
Insert the battery into the compartment and replace the cover and screws.
MAINTENANCE
SPECIFICATIONS
•
Clean the outside casing with a soft cloth lightly moistened with mild soap and water.
Never use any abrasive or solvents.
INFORMATION ON WASTE DISPOSAL FOR CONSUMERS OF ELECTRICAL &
ELECTRONIC EQUIPMENT.
When this product has reached the end of its life it must be treated as Waste Electrical & Electronic
Equipment (WEEE). Any WEEE marked products must not be mixed with general household waste,
but kept separate for the treatment, recovery and recycling of the materials used. Contact your local
authority for details of recycling schemes in your area.
Made in China. PR2 9PP
Man Rev 1.0
2
Inputs
4 x 6.3mm jack sockets
Input impedance
3.3kOhms
Output
1 x 6.3mm jack socket
Output impedance
600 Ohms
Output level
+4dB (+8dB max)
Battery
9V PP3
Power Supply (not included)
12VDC 200mA
Dimensions
150 x 108 x 68mm
Weight
530g
