Pulse MEGAMOUTH, Руководство пользователя, Страница: 4 / 4

¼ ¼ Ê õ ² Î Ê ý
À © Ò ô » ú
· ¢ É ä Æ ÷
Ê ¹ Ó Ã Ë µ Ã ÷ Ê ¹ Ó Ã Ë µ Ã ÷
OPERATION
SPECIFICATIONS
AMPLIFIER
And TAPE volume control to adjust the volume. Adjust tone
control to achieve the best sound quality.
4. Tape record:
Open the cassette door and insert a blank tape. Press the
REC key and PLAY key simultaneously to start recording.
Signal from wireless microphone, MIC in jack and Line in jack
can be recorded.
5. Wireless Microphone:
A. Insert a 9V battery into the wireless transmitter. Turn on
transmitter power switch, power LED indicator will flash
Once then off.
NOTE: When transmitter power indicator lights red, it
means the transmitter battery power is low. Please
replace with new battery.
B. RF indicator on amplifier will light.
C. Extend the antenna on the top of amplifier fully.
D. Adjust amplifier volume, tone, echo control to a suitable
level.
E. Keep transmitter at least 1m from speaker of main unit to
avoid feedback. If feedback happens, lower the volume and
move transmitter away from main unit.
6. Wired Microphone:
Plug wired microphone into MIC input jack. Keep MIC head
away from the speaker of main unit to avoid feedback.
7. External audio source:
You can play other audio device by connecting output of
other audio source to line input jack.
8. Line out:
Connect line out to external amplifier to amplify the sound.
9. Phone out: Connect phone out to earphone.
Frequency range: VHF 173~175MHz
Dynamic range: 80dB
Frequency Response: 100-10KHz
Working Temperature: -20 ~40
Battery Voltage 9V battery
Battery Life about 10 hours
· ¢ É ä Æ ÷
À © Ò ô » ú
Receiving Mode: VHF
Output Impedance: 600
Frequency Range: 173~175MHz
S/N Ratio: 60dB
Stability for frequency: +/-0.005%(-20 ~40 )
Power Output: 30W(MAX)
Effective Distance: 50M (open field)
Power supply: AC 230V 50Hz;DC 12V-15V
TRANSMITTER
AMPLIFIER