Pulse MEGAMOUTH, Руководство пользователя, Страница: 3 / 4

Ê ¹ Ó Ã Ë µ Ã ÷
1. Confirm the power:
A. When use AC power:
1) Please confirm the AC power is same as that marked on
the device(Near AC in jack). Or the device may not work or
be damaged.
2) Turn on the volume control in clockwise direction, power
will light to indicate normal power.
B. When use the built-in DC 12V rechargeable battery:
1) Open battery compartment. Connect rechargeable battery to
DC connector with correct polarity(Red means +, Black
means -).
2) Turn on the volume control in clockwise direction, power
indicator will light to indicate normal power. If low battery
indicator lights, it means battery power is low. Please
connect AC power to charge the battery.
C. When use external DC power:
1) DC power can be input into by DC power jack directly.
2) When use car battery, voltage should be 12V-15V. Please
correct polarity.
2. Recharging the battery:
A. Plug the power cable into AC power jack for recharging.
time is about 10 hours.
B. When CHARGE indicator turns to GREEN from RED, it
battery is fully charged.
C. Please recharge the battery every 2 months if you don't use
long period of time.
D. Battery will be charged either main power is off or on
3.
Tape play:
Turn on the power/volume control in clockwise direction, power
indicator will light red. Press the STOP/EJECT key on the
cassette. Cassette door will open. Insert tape and close the
indicator
note the
Charging
means
it for a
cassette by pushing the top right corner of cassette door. Press
PLAY/PAUSE button to start playing of tape. The signal level
indicator shows the signal strength. Use power/volume control
PARTS DESCRIPTION
OPERATION
Wireless Transmitter
1
2
3
4
Handheld MIC
2 3
4
5
Body pack transmitter
6
7
1. Grille(capsule inside)
2. Power indicator
3. Power switch
4. Battery compartment
5. MIC in jack
6. Tie clip MIC
7. Headset MIC