background image

13

Questions or concerns? Visit our website at www.pulsescooters.com for replacement parts and technical support, or call (866) 434-6067.

Repair and Maintenance

Do not store the battery in temperatures above 70°F (21°C) or below 32°F (0°C).

Disposal: This product contains sealed lead acid batteries which must be disposed or recycled in an environmentally safe manner. Do not 

dispose of the batteries in your household trash. Do not dispose of the batteries in a fire, this could cause the batteries to leak or explode. 

The incineration, disposal in landfill and or placing sealed lead acid batteries with household trash is prohibited by law in most areas. Return 

exhausted batteries to a state or federal approved lead acid battery recycler or check with your local retailer of vehicle batteries. 

Battery Care and Disposal

THIS MOTORBIKE CONTAINS SEALED LEAD ACID BATTERIES WHICH MUST BE RECYCLED IN 

ACCORDANCE TO YOUR LOCAL AND STATE LAWS. PLEASE CAREFULLY READ AND UNDERSTAND 

THE FOLLOWING DISPOSAL INSTRUCTIONS:

WARNING:

 Do not mix old and new batteries. Do not mix alkaline, standard (carbon-zinc), or rechargeable 

(nickel-cadmium) batteries.

Do not store the battery in temperatures above 70°F (21°C) or below 32°F (0°C).

WARNING:

 Make sure to wash your hands after handling batteries as they contain lead compounds. 

Содержание EM-1000



















Отзывы: