Pulse fitness Strength, Инструкция по установке, эксплуатации, безопасности и каталог запчастей

Страница: 29 / 50

Feed belt through slots of clamp at
weight stack end and pull taut to remove
any slack.
Tighten both cap screws as tight as
possible using a long arm allen key
while still pulling on loose end of belt.
SAFETY NOTE: Torque tighten to
17 N.m (145 lbf.in)
Too much tension
on belt will lift top
weight resulting in
weight stack
misalignment.
Direct belt through pulleys ensuring
that the smooth side of the belt runs on
the pulleys. If not possible ensure that
smooth side is on weight stack pulleys.
1x6mm
1x4mm
29
REMOVING & FITTING
(NEW BELT) (CONT.)
R
E
M
O
V
IN
G & F
IT
T
IN
G
A
N
E
W B
E
L
T