www.pulsar.pl
INTU
4
2. Installing the drivers.
For proper operation, the USB-TTL interface requires the correct drivers installed on the PC.
When connected to a free USB port on the computer, the interface will be automatically detected by the
operating system and the drivers will be installed.
If the drivers have not been previously installed, you must download the appropriate instructions and
complete the installation in accordance with the guidelines. All instructions and drivers are available on the chipset
manufacturer's website at:
http://www.ftdichip.com/Support/Documents/InstallGuides.htm
Drivers to be installed can be downloaded at:
http://www.ftdichip.com/FTDrivers.htm
After installing the drivers, connect the USB-TTL into the USB port of your computer. An additional COM
port (e.g. COM5), configured with the interface and providing access to the PSU, will be displayed. The assigned
COM port can be checked in the Device Manager window (location: START > Control Panel > System > Hardware
> Device manager).
Fig. 3. The device manager window.
