Software
© 2016 Pulsar Informatics, Inc.
Page 20 of 26
Auto fill In Bed algorithms
The Auto fill in-bed detection algorithms use the Active/Inactive classification
calculated in the Step 1 as an input. The default Auto fill setting is the Tudor-Locke
3
algorithm. Alternatively you can create a custom set of parameters by selecting
‘Custom’ then adjusting the settings as desired:
The parameters in the custom in bed algorithm are the following:
Raw file field
Description
In-Bed Onset Trigger (min) Number of consecutive Inactive epochs that mark the
possible beginning of an In Bed period. The In Bed
period would start at the first epoch of the
consecutive Inactive epochs
Min In-Bed Duration (min) Minimum duration that an In Bed period must last
without a Wake period starting.
Wake Onset Trigger (min) Number of consecutive Active epochs that mark the
possible beginning of a Wake period. The Wake
period would start at the first epoch of the
consecutive Active epochs
Min In-Bed Duration (min) Minimum duration that a Wake period must last
without an In-Bed period starting.
